Not sure what kit is right for you? Click here for our guide chart.
The Canister Valve Removal Dongle will allow you to remove the Canister valve without the FI light coming on just by plugging in into the harness where the Canister valve plug goes. It fools the stock ECU into thinking it is still there. You will still get warning lights for other important items. Look into our SAS 'Stage Kits' for more comprehensive 'plug and play' kits. Fit's all KTM twin cylinder fuel injected bikes.
Kit Selection Chart:
Choose 'A' Dongle for:
Choose 'B' Dongle for:
In this video we walk you through every detail of the typical emissions system on a KTM big twin so that you can better understand how it all works and where parts of the system are typically found.
This product carries a 1 year warranty against defects in materials and craftsmanship.
Posted by BRAD on 10th Mar 2017
I have a Superduke 1290R and Ordered Stage 3 kit 4 1290 GT. The canister dongle is different between GT and R. So ordered the R dongle. Fits good with no display errors.
Posted by Gary on 6th Mar 2017
Simplest fix there is.
Posted by Unknown on 3rd Mar 2017
Easy install. Great product
Posted by Unknown on 4th Feb 2017
After watching the video and having plain old common sense, this installation was easily accomplished. Product was 100% compatible with My KTM. My bike was operating perfectly after installation. H-I-G-H-L-Y recommended to all KTM Superduke 1290r owners
Posted by Gareth Williams on 3rd Feb 2017
Plug and play. Couldn't be easier, worked perfect!
Posted by Unknown on 20th Oct 2016
I removed the canister because I was installing a rally raid kit. The kit gave directions to remove and replace the plug with a resistor from an electronics store. The new resistor needed to be juryrigged in. It would have worked fine but given the nature of the bike having the resistor stuck in the plug then wrapped in electrical tape seemed flimsy. The new plug fit perfectly, makes a great seal so no dirt or water worries, and takes up very little space.
Posted by Robert McAdam on 14th Oct 2016
Wanna get rid of junk and open up some space for things you actually want to keep under your seat? Then this is for you. One and done.
Posted by Bob on 20th Aug 2016
Perfect for the KTM 690 and a good price. Win win
Posted by Unknown on 16th Aug 2016
I have wanted to remove my charcoal can since the
day I bought the bike. The only missing piece of the puzzle would be to include a brass plug for the former vacuum hose.
Cant wait to buy the replacement air filter housing.
Posted by Unknown on 15th Aug 2016
Easy install and worked great
Posted by Dressen on 20th Jul 2016
I bought this for my KTM 690 enduro. It's plug and play, excellent fit. To improve this offering, might i suggest a 6mm screw to plug the vacuum hole on the other side.
Posted by Ryan Gifford on 18th Jul 2016
Removing the canister from a ktm 1190 adventure R would mean having to see an error code on the dash readout without this useful tool. A must have, and the price is very reasonable.
Posted by neal on 3rd Jul 2016
plug and play no mil correct connector and with a rotweiller intake cleans up a whole bunch of crap ... does not change drive-ability would be a total package if it came with a rubber plug
Posted by Unknown on 21st May 2016
Fast shipping. no fi light. could not be happier!
Posted by Jas C. on 5th Apr 2016
I removed my canister and ordered the dongle that plugs into where the canister was. Prompt shipping and the module works great! It is small and out of the way with no error codes.
Posted by Thomas on 3rd Feb 2016
The SAS Valve removal dongle turned a potentially messy job into a simple plug-and-play installation! Delivery was quick! Rottweiller was great to deal with!
Posted by RobG on 10th Aug 2015
Easy replacement of the solenoid. No FI light after install.