Not sure what kit is right for you? Click here for our guide chart.
The Canister Valve Removal Dongle will allow you to remove the Canister valve without the FI light coming on just by plugging in into the harness where the Canister valve plug goes. It fools the stock ECU into thinking it is still there. You will still get warning lights for other important items. Look into our SAS 'Stage Kits' for more comprehensive 'plug and play' kits. Fit's all KTM twin cylinder fuel injected bikes.
In this video we walk you through every detail of the typical emissions system on a KTM big twin so that you can better understand how it all works and where parts of the system are typically found.
Posted by Mark Button on 8th Jun 2020
This dongle works as advertised with no technical issues. I got the 'B' dongle which is designed to clip onto the tab where the valve resides. Unfortunately, the clip was too narrow for the tab so I had to tie-wrap it to the tab. I have an early 2016 GT so it might be a production issue.
Posted by laurent on 19th Apr 2020
très content du produit s'adapte correctement a la prise d'origine génial L'installation prend environ 5 secondes pas d'erreurs obd recommande rottweiler livraison en temps réelle des la commande passe il sont très sérieux et professionnel .
Posted by BRUNO on 26th Oct 2019
Merci,pour vos produits;163 CV roue AR,et 13.4 mkg de couple,après réglage BCR ISSOIRE.....le MUST du 1290 SDR V 2!!!!!!!!!!
Posted by TREV on 25th Jun 2018
It is a simple effective device, plug and forget
Posted by Unknown on 21st Apr 2018
Takes about 5 seconds to install. Does exactly what its supposed to do!