NOTE: 2019 KTM 690 R/SMC model note: For the 2019 KTM 690 models KTM has adopted the same exact engine and operating system as the 2017+ Husky 701. As such the Powercommander V units that we are currently offering for the 2019 model KTM 690 are 2017+ Husky 701 Dynojet part numbers. These have been dyno tested and installed in house and have been verified as working units for those seeking to get their bikes remapped now. Dynojet simply does not release a verified KTM part number until they have a 2019 KTM model ‘in house’. Eventually they will have a KTM specific part number for the 2019+ models, but the only difference will be the instructions which are also very much the same as the 701 anyway.
Power Commander V (PCV) is by far the most comprehensive way to properly and easily tune the fuel delivery of your fuel injected motorcycle, and it goes well beyond just tuning alone.
When you purchase a Power Commander from Rottweiler performance, we will not only perform the initial set-up FREE of charge if asked, but you will also have access to any maps that we have created for your bike as long as you own your motorcycle!
“But I don't know anything about fuel injection tuning, is this a big learning curve?”
Absolutely not. They are completely plug and play, but we can make them even better with some basic information from you with our 'Pre-Setup Program'. A service we provide free of charge! Just call us or leave us notes in your order to call and we will set it all up for you, 'PLUG AND PLAY', with a signed certificate right in the box. Furthermore, with some simple understanding you will quickly find that tuning with a Power Commander is far easier than old school jetting, and takes nothing more than a laptop, tablet or computer that runs Windows and connects with the included USB cable.
A Power Commander operates by adding or subtracting a percentage of fuel from your bike’s OEM fuel maps. If you wanted to add 10% fuel everywhere, you would simply input the number 10 in every cell for each cylinder. If you want 10% less, you would insert -10 in every cell. That's it! PCVs come pre-programmed with an optimized map for stock, but if you have some bolt on items and want something more, just select the from the list of modifications and we will install the best map we have for your bike’s configuration.
THERE IS NO LAG TIME AS THESE SIGNALS ARE INSTANT!
Aside from fueling control, you will be able to benefit from the extras outlined below: (If you don't want any of these, you don't have to do anything. They are only enabled when you learn how to turn them on.)
Advanced options are:
OPTIONAL accessories that will work seamlessly with a Power Commander:
In addition to giving you full and simple control over your bikes fueling, the PCV is also the key to the following accessories:
Dynojet Map Switch: A simple handlebar mounted switch that will allow a Power Commander to have two different maps loaded into it and allow you to toggle between them on-the-fly, while you ride! When used with an Auto Tune unit, it will turn Auto Tune on and off. (see HERE for more info)
Dynojet Auto Tune: Auto Tune adds the ability for you bike to “tune itself” while you ride! It’s basically like installing your own personal rolling dyno that is always searching for the perfect AFR (air-fuel-ratio). (see HERE for more info)
POD-300: When added, it can display any of the channels that are being tracked such as RPM, throttle position, injector duty, percentage of fuel alterations, ignition advance, air fuel ratios (requires Auto Tune) and more. The POD-300 will also allow changes to mapping in 1/3 adjustments. For example, if your rev limit is 10,000 RPM, you can adjust the fuel (+/-) in any percentage from 0-3300, 3300-6600, and 6600 to 10,000. The POD-300 also supports data logging as many channels as you choose and will then export to Excel for further inspection. (see HERE for more info)
The list goes on but don't be intimidated, this is a plug and play item that can be upgraded later as desired or as you learn more about the functions. Don't want to? Don't worry, this is as easy or as in depth as you want to make it. Think of a Power Commander like a Swiss Army Knife. You can use just the one tool, or you can use them all.
IMPORTANT NOTE: As of July 2018, Dynojet has ceased to include O2 optimizers with Power Commander V's to comply with perceived domestic and international regulations. At Rottweiler Performance we know optimizers play an integral part in conjunction with a Power Commander V and will include a free set if chosen below.
See http://www.powercommander.com/powercommander/Default.aspx for warranty information.
Posted by Unknown on 13th Mar 2020
Hell yeah !!!!!!!!! I can't believe I waited so long to get one. After installing a "wings" slip on and a Rottweiler air filter I thought I could get away with just the dongle and didn't want to spend the money. Well, I was wrong, very wrong. If you're hesitating like I did, don't. It was the single best mod, improvement, I've made to date. The bike is a totally different animal now. Just get the damn thing and thank me later...…….
Posted by Scott Bain on 25th Jan 2020
Bike runs so much better I’m super happy with this! It’s what the bike should feel like! And it’s easy to install, I haven’t fitted auto tune yet I will leave that for another weekend as I will have to get the wide band o2 sensor bung welded in by someone. Thank you Rottweiler I’m a happy customer!
Posted by Chris on 9th Aug 2019
Absolutely Awesome if I could give 10stars I would
I Fitted my Pre Mapped PCV and I’m speechless
What a difference it made , now my 690 performs like it should .
Rottweiler Performance , You Guys are THE BEST 10/10 from me .
A very happy customer here .
I can’t recommend these guys enough .
Well done ,Keep up the good work