Loading... Please wait...
  • KTM 690 (2019+) Enduro/SMC-R Rear Fender Eliminator/Tail Tidy
  • KTM 690 (2019+) Enduro/SMC-R Rear Fender Eliminator/Tail Tidy
  • KTM 690 (2019+) Enduro/SMC-R Rear Fender Eliminator/Tail Tidy
  • Off
  • Running Lights
  • Brake Lights
  • Right Turn Signal
  • Left Turn Signal

KTM 690 (2019+) Enduro/SMC-R Rear Fender Eliminator/Tail Tidy


Product Description

Not only is our Tail Tidy the only one in the industry, but it's also the nicest by far. If you want to clean up your tail section there is no better Tail Tidy than this. We've taken great effort in making this kit a Plug & Play requiring no modifications to your bike, no wiring necessary and no need for inline LED Resistors. Just remove the stock tail and plug this one right in with the factory connections all ready to go. Fabricated from 1/8 aluminum with a hand TIG welded gusset, the Rottweiler Performance KTM 690 Enduro/SMC-R (2019+) Tail Tidy is by far the easiest and cleanest setup available with all of the rear lighting integrated right into the plate frame.

NOTE: LED lights DO NOT photograph well so don't judge the brightness by the pictures. This is one bright LED taillight and uses only the latest and brightest technology.


  • Pre-wired PLUG AND PLAY straight to stock connectors. NO WIRING OR WIRING KNOWLEDGE NEEDED.
  • No more melting your left turn signal, no matter which exhausts you use.
  • Ultra-bright integrated LED lights.
  • License plate light, turn signals, running lights and brake lights integrated and sealed into the frame.
  • Ultra-tough black textured powder-coated frame.
  • 30-45 minute install.
  • Hand made with care in the USA by Rottweiler Performance.
  • Fits U.S. motorcycle Plate only.


Warranty Information

Warranteed for one full year against manufacturer defects.

Product Reviews

Write Review

  1. Built to Last 5 Star Review

    Posted by on 2nd May 2020

    Being that I’m in the industrial mechanical field, I’d like to think I have a keen eye for craftsmanship and the ability to distinguish between quality and crap. The first thing I noticed about the tail tidy right out of the box is that this thing is built like a brick shit-house. No cheap materials, no skimping on Fran thickness. It’s definitely built to last and looks great too. The brightness of the LED’s was both surprising and impressive. Will definitely be using more of Rottweilers parts on this bike.

  2. Looks awsome! 4 Star Review

    Posted by on 5th Dec 2019

    I really like the way it turned out and you get to eliminate a lot of junk off the bike. I do wish they would have included or at least mentioned that you will need to replace the stock flasher with a LED flasher to fix hyper flash of the blinkers. Not an expensive part but for the price of this tail tidy it should have been addressed.
    The directions said to carefully tape the wires to the back of the plate using the indents in the Liscense plate when possible. It also said not to double up or pinch wires. Ultimately when you get all the wires ran and taped you install it to the mounting plate tighten it down subsequently pinching the wires to some degree anyway. A milled our center of the mounting plate would have solved this issue and again for how spendy the unit was would have made sense. Please note that you do have to file four U shaped grooves in your Liscense plate to allow for wires. If this unit ends up standing the test of time then I recommend it to anyone who wants a nice clean look to their 2019 690.
    I also wonder what to do if the lights were to burn out or fail later on down the road. Can it be repaired??

  3. Great Product! 5 Star Review

    Posted by on 6th Nov 2019

    The product is awesome and provides the look I was going for. Solid build and easy bolt on fit with direct plug in. It does require a little cutting of the license plate to fit the wires of the frame. Blinker speed increased a bit but not an issue for me. Great product!

  4. Very nice clean tail tidy. I wish the LEDs were a little brighter 4 Star Review

    Posted by on 27th Oct 2019

    This is a well made and easy to install part. I had to slightly bend the top two tabs in a vise to get them to fit around the rear mount/subframe on my 2019 SMC-R. Not a big deal. Bike looks MUCH cleaner. Simple plug and play worked great. My only real complaint is that i wish the LEDs were a bit brighter. Recommended!

Shipping Weight:
1.60 LBS
Calculated at checkout