The long awaited Rottweiler Performance System for the mighty 690 is finally here, and built with the only tools we have at our disposal; QUALITY and POWER.
Starting with our proven recipe, we ported our induction knowledge into the big single and created this intake with our signature power producing filter elements. But we didn’t stop there. We reshaped the intake tract with our proven ‘Tuned Velocity Stack’ design in order to maximize intake tract length and velocity. We even added a clever little detail to the outside of the bell-mouth of the velocity stack that keeps water out, and only the good stuff in: CLEAN AIR.
Add tool free removal and incredibly simple access to the intake tract and what you have left over is a KTM big single that guarantees to add the smiles to your miles.
Fuel Mapping Questions: A PCV is not required on the 690 for 'safe fueling' when simply bolting on this product. As tested completely stock the AFR (Air Fuel Ratios) values stayed well within safe limits across the RPM range. A PCV is simply the key to achieve full control over fueling for better or maximum performance, power and the ability to switch maps easily, use Auto Tune for 'dynamic mapping' or install a quick shifter. Think of a PCV as a 'jetting kit' for fuel injection that will offer even more functions. To learn more, click here.
Rally Raid Fuel Tanks Option: If you are installing Rally Raid fuel tanks that require you to cut off the seat tabs on a 12-17 KTM 690 Enduro, we have created a special mounting option to compensate for the missing seat tabs below. For 08-11 with Rally Raid tanks, simply select 08-11 intake. If your Rally Raid kit does not require the set tabs to be cut off, then simply select the normal kit for your year. The Rally Raid option kits are custom built to order so please allow one extra day for delivery.
Read below and save with bundled options and big discounts:
Looking to save money while maximizing your power output, run multiple fuel maps with and without ignition advance, auto tune your mapping, clutch-less upshifts and more? Add a Powercommander V below, fill the option selections and we’ll send you your PCV already mapped and ready to go with your custom desired setup just for you. You’ll receive a custom certificate with your name, PCV model and serial number, all PCV setups noted and a hand written signature signifying our commitment to quality and service.
Want to complete your total package and bundle exhaust components and save even more? Choose your exhaust package below and tack on an extra 5% savings on the already low MAP prices of our exhausts. These packages are only found on this page for the 690 Enduro and not offered anywhere else on this site.
In this complete 'step by step' video Chris shows you everything you will need to know when installing a Rottweiler Intake on your KTM 690 Enduro. The video is detailed, but the install is easier than you would think.
This product carries a 1 year warranty against defects in materials and craftsmanship.
Posted by jake widen on 21st Oct 2017
Amazing product huge gains in power very intimidating the bike has earned much more respect along with my exhaust and power command tuned by Rottweiler. Amazing pull and the bike doesn't pop as much on decel and I can feel the bike breathing better.
Posted by Dusty Wood on 3rd Aug 2017
Fit and Finish is incredible! I replaced the "other" brand aftermarket intake on my 690 SMC with the Rottweiler and notice a day and night difference before the remap!! Top notch product through and through!! Also installed the Rottweiler intake on my Superduke 1290, makes me want to buy more KTM bikes! If they only made intakes for Ducati I'd truly be in heaven!!
Posted by Spencer on 12th Jun 2017
Installed this along with new exhaust and power commander programmed by Rottweiler. Huge noticeable power increase. Almost scary. The bike idles much better, and the power is much smoother. It is a whole new bike. Should have done this upgrade a long time ago!
Posted by email@example.com on 16th Apr 2017
I purchased the Rottweiler Intake for my 2015 KTM 690 Enduro R. The product came nicely packaged with all parts needed. The installation was simple and took roughly 1 hour. Now for the good stuff.... this Intake completely transformed my bike! Prior to installing the Intake I was running a AU uni-filter with the evo 1 airbox lid, a PCV with both Rottweiler maps and map switch. I had no clue how much the stock airbox was holding the bike back. It ran great and I thought it was making good power. The PCV made a huge difference from stock. Now that I have the Rottweiler Intake, the power is increased throughout the entire rpm range. I would say that the Intake made as big of a difference as the PCV did. Now that I have both, the bike is simply amazing. I wish I would have purchased the Intake when I installed the Power Commander. This thing rips! I am so HAPPY. Rottweiler absolutely nailed it with this Intake. Aside from the amazing power increase, I no longer have to worry about the poor design of the factory airbox letting dust through to the engine. The Rottweiler Intake seals perfectly, and is super easy to remove and clean. If your on the fence about getting this Intake, just bite the bullet and do it. You bike will thank you. You'll wish you would have done it sooner! To unlock the true performance this product is capable of, get a Power Commmander 5 as well. It's basically like adding nitrous to an already amazing machine.
Posted by firstname.lastname@example.org on 26th Mar 2017
Read reviews on this particular product for well over a year. Did not wanna spend the money for the Intake and now that I did I wished I would of a long time ago. Very easy to put on the video tells you step by step what to do. A little more Intake noise then stock but I like it. Absolutely wonderful customer service I emailed them back and forth were a great help and I will be buying from them in the future thanks guys
Posted by Kris on 20th Feb 2017
This product is very well designed for the bike. All instructions are very clearly written. I 'seat of the pants' dyno certainly tells me the bike responds better throughout the engine range. I does increase 'intake noise' but that is too be expected with such a non-restrictive intake. The bike certainly does 'breathe easier'.
The added 'option' of the storage bag is great too. Gives a bit of 'hidden' storage space under the seat. Great idea.
Shipping was very quick and the customer service is beyond superior.
Posted by Justin Jacobson on 3rd Feb 2017
What a rocking product. Rottweiler's online reputation preceded them with this purchase and I am very happy. Customer service was awesome too. Thanks Mariel!
Posted by Jeff Richard on 21st Jan 2017
Just received the kit in the mail. It's winter here in Canada so I'll have to wait for spring to see how it goes. Only thing I can see being an issue is cleaning the filter when its dirty as the filter and plastic structure are permanently mated. I wish you could remove just the filter for cleaning. Otherwise it looks like it will work as billed. Thanks Rottweiler.
Posted by J Alexander on 17th Nov 2016
I felt the 690 to be a bit lackluster in the power and filtration department (found lots of dust in my stock air box) After installing this kit I was blown away at the instant results. A little hesitant at first to drop the money, but now will have to budget this into every KTM bike purchase moving forward. Thank you Rotty people!! Braaaap!
Posted by Alex K on 13th Nov 2016
I recently purchased a 2010 KTM 690 Enduro R and went on a spending spree out fitting it how I wanted. A guy I know with a 990 Adventure suggested and raved one of these intakes. I was concerned with water crossings. He floated his 990 down a river and never had a single issue. Install was VERY straight forward and the bit of kit is a very high quality. I did the front bag setup as well which made running around town much easier. The intake noise is much louder (I like it) and it made a VERY noticeable difference in mid range torque. Between this, an FMF slip on, deleting all the smog equipment and using the TuneECU cable/software to remove throttle restrctions and adjust fueling, its a completely different bike! Don't hesitate! Well worth the money!
Posted by Bob on 3rd Nov 2016
Rottweiler did not skimp or cut corners like so many other companies do with there products. This is a solid design and easy install. It upgraded the performance of my 690 by leaps and bounds.
I would love it if your RnD department could come up with a cool design for extra fuel storage in place of the Internal Tank Bag as an option.
KEEP UP THE GREAT WORK!!
Posted by chipp robb on 14th Oct 2016
Recently installed and enjoyed the process very much. The build quality and supplied hardware is very, very nice. The instructional video is professional and comprehensive with good installation tips that make sense. I didn't have to make any modifications as is normal with lesser quality bolt ons. Very happy with the results. The bag is a nice touch too.
I haven't put many miles on yet but can tell that it will last a long time and provide reliable performance and the filter skins that I ordered with the kit will make trail side cleaning a breeze by carrying extras.
On the exhaust end I was already using a Remus Hexacone / titanium header on stock map setting 2 (advanced), and now the motor is obviously breathing much better. Throttle response is yet another level of slightly more crisp and bottom end sweeter. The induction noise is noticeably more throaty and all good, to be expected. The combination sounds deep and punchy with a mean growl at higher rpm.
Posted by Jason Z on 3rd Oct 2016
Fantastic results. By far the best bang for the dollar mod you can do to a 690. Plus there is room for their storage bag which I love.
Posted by wayne on 18th Sep 2016
Received the intake in about a week considering it was a international order. Fitting was easy, especially with the YouTube video to follow, my only hang up was the angle of the silicone hose from the intake to the throttle body was a bit out and needed some trimming on the top side of the hose as it wouldn't make a even seal all the way around otherwise, and sit mounted flush and at the correct position otherwise.
I imagine these are the only thing not made in house by rottweiler so not really their fault, but would like to make people aware of it.
Other than that all other parts supplied are manufactured to a high quality .
After the install I did the throttle position sensor reset and the 15 minute idle reset to allow the remapping to take place took it for a quick ride and immediately noticed the difference.
The bike seems to just run alot more smoothly from low down all the way through the revs , im still running the standard exhaust but still there is a notable difference in the bikes performance .
If I could give this a rating of 4.5 I would, the only issue was the silicone hose as mentioned and also it came in blue instead of orange as picured when I ordered, im not that fussed of the colour but I imagine some would be so just give the option.
Other than that I will give some video footage on YouTube of the end product out in the bush soon (waynejenkins @ YouTube).
I would really recommend this product over the standard air box by a huge margin.
Thanks rottweiler performance for a great product!!
Posted by Scot Kump on 12th Sep 2016
perfect fit quality material could not be easier to install. a rare find something that works.
Posted by Sammy on 31st Aug 2016
Ordered with PCV and a map switch. Came with the form that explains my mappings as advertised. Wanted the two mappings because I was worried about fuel consumption for some of the longer ADV rides I go on.
Installation was easy. Noticed an improvement in the bike's power delivery immediately. Testing showed no significant difference in fuel economy.
About two weeks after installation, took the bike on a trip from Anchorage, AK to Inuvik, NT. Bike performed excellent throughout some gnarly roads in the Arctic. Fuel economy is a big deal because some of the legs are 250+ miles between gas stations. I had no issues.
Super happy with this upgrade. Gives my bike more braap with no negative side effects and the new airfilter is much easier to work on and get to things with the giant stock airbox gone.
Posted by Ray from NorCal on 30th Aug 2016
I got my hands on a 690 a couple months ago, and was a little disappointed in the power delivery of the stock set up. In my online search for ways to uncork the bike, I came across Rotweiller and all the good reviews surrounding the company. I called them up, and although it took a couple of try's to get a hold of someone (they are a small company, so be patient and give them a couple of calls if needed, it is well worth the wait), I eventually got a hold of the owner Chris. He took the time to walk me through everything they have to offer for my bike and their experience with each setting, which led me to purchasing the intake in addition to many many other parts they have for the bike. The intake is simple and *(&$^()# awesome! It goes in easily, the instructions were spot on with no surprises during installation, and the power and sound changes in the bike were worth every penny. I would recommended getting the Power Commander with Rotweiller's map as I did, and you will be VERY happy with the way your 690 performs. I will be purchasing their intake system for my 1290 in the near future.
Posted by jonny on 25th Aug 2016
Love my new filter kit
Posted by Dressen on 20th Jul 2016
Easy to install and great fit. Very happy with this design, much easier to change the air filter. I recommend using the filter skins as well.
Posted by Justin E. on 3rd Jul 2016
I was impressed with the quality of every part in the intake system kit. Nicely packaged and the install was easy. Seems to have picked up some low and top end power on my 2010 enduro/sm. Quieter than the stock airbox without snorkel, but adds an interesting sound from the throttle body. Also opens up airflow behind the radiator which seems to keep the bike a bit cooler as well.
Posted by neal on 3rd Jul 2016
huge gain with pcv easy bolt on runs cooler love the sound with a stock exhaust intake tube could use a little trimming my kinked a little ... mixed some 100 octane sunoco with 93 and she is so happy ....dragged raced a 1290 super duke the other morning of course he beat me but only by a bike and a half in a 1/4 mile ... its a nice piece and if you want to feel a real seat of the pants gain and it cleans up the wiring if you take the time to sort it out ... would like to hear back from chris about the intake hose ... he had the knowledge others didnt ...thanks man!
Posted by RiverRunner on 6th Jun 2016
The Rottweiler system with filterskins worked great on a two day "Black Dog" rally here in Oregon. Just pop off a dirty filter skin and replace with a new one from a baggie - you are good to go. You can even store the filter skins in the big area left when you pulled out the original air box. I don't really notice a big increase in intake noise. I think this set up will work great on an upcoming two week trip into the dust hell of NV Blackrock and OR-ID Owyhee country. Was money and time well spent.
Posted by Martin on 8th May 2016
It took less than an hour and a half to fit airfilter and PCV. Lots more space on top of engine and at last the inferior KTM filter assembly is gone. On 8000 km there was more dust inside the stock airbox than on the outside.
Posted by Unknown on 7th May 2016
I've noticed a fair increase in power with this intake system. The filter is far easier to clean and get at then the stock and even setting valves on the bike is easier because the gigantic stock air box is no longer having to come out.
I am only running the intake with no pcv at the moment and you definitely still feel an increase in power and less effort when clawing for revs. And the thing I noticed the most is the sound. I am running a wings exhaust with an "off-road baffle" and before installing this setup it sounded much like the stock with a slightly higher db top end. Now it has a more aggressive bark even at low/mid rpm.
I recommend you get this product if you like your 690 and feel like there is something missing or are sick of fiddling with the clunky awkward stock box. I am in Canada so with shipping and import this cost me around 570 CAD and after the first ride I knew it was worth it.
Posted by Nik Vollweiler on 19th Apr 2016
Tremendous difference from the stock airbox. I even had the open air lid on my stock box and this is light years ahead of the stock heinous air box. I installed this intake along with my custom dynoed map onto the PCV. I also have a map switch enabling me the ability to utilize Rottweiler Performance's map as well. I was shocked at the instant performance gains I noticed on the first ride. This thing soars thru RPMs and can easily balance my wheelies in third and fourth gear without shifting my weight anymore. It almost bursts into power on the higher RPMs (6-7k). Such an amazing product. Thank you so much Rottweiler Performance for another quality, well machined, and thoughtful product!!
Posted by Brilloman on 16th Apr 2016
The stock air box and filter on the 690 isn't the best at keeping fine dust out and the bike really seemed to struggle to rev over 5000 RPMs. I had previously added a aftermarket muffler to my bike but didn't notice a whole lot of increase in power but the addition of the Rottweiler intake was a game changer! The bike now revs effortlessly up to redline and runs the way it should have from the factory had it not been for restrictive stock intake and exhaust. The intake requires some minor assembly but the installation is simple and straight forward. If you have ever had your air box off before it goes pretty quick. The fit and finish of the intake are excellent. The sealing of the filter to the base plate is a proven design that Rottweiler uses on their intakes for other models so I expect it to keep the dirt out and the air entering the engine clean. The dzus fasteners make it simple to remove the air filter and the optional filter skins extend cleaning intervals which are perfect for multi day rides in dusty conditions. I highly recommend this product to anyone looking to improve the protectection from dust entering the engine and improve the performance of their 690.