Loading... Please wait...
  • Image 1
  • Triple Layer Foam with flame retardant interior layer
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Rottweiler Intake System - Adventure 950

$299.00

Product Description

This is the very system that started a revolution. The Rottweiler Intake system has lit the KTM community on fire with grade AA results across board and continues to deliver. To start, you can expect from 8 to 12 horsepower gains, but it doesn't end there. With the addition of a 'Snap Out' bracket on Adventure models, swapping pre-filters becomes a 45 second affair with one screwdriver. On all models, you can also expect a 6 lb (3.6 kg) weight savings with the removal of the SAS and Evap canisters systems using our SAS Stage 1-3 systems. That's almost another horsepower in weight savings alone.

These do not come pre oiled for shipping purposes. We recomend No Toil Oiling kits for both our intake filters and pre filters.

Jetting kits found here

Flex Jet kits found here

Benefits of the Rottweiler Intake System:

  • The most cost effective horsepower gains on the market. About $30 to $40 (US) per HP vs $100 to $200 for an aftermarket exhaust.
  • Dramatically reduces the jerky 'on-off' throttle response of the big twin. Mountain roads and tight traffic become a joy again.
  • Full tri layer foam element on all sides of the filter including the top, not just one side, aiding in air velocity optimization and overall filter surface area.
  • The outer layers of foam provide optimum filtration and load-up capacity while the inner layer is made of special self-extinguishing filter foam. Together, they five the best combination for air flow, engine protection and safety.
  • New V3.0 baseplate machined from billet 6061 T6 for ultra rigidity, pocketed for lightweight and then thermo-coated to reflect rising engine temperature.
  • No tools needed to change or remove the filter. Removed in seconds.
  • Weight reduction of 1.6kg (3.5lbs) just by replacing the stock airbox with the Rottweiler Intake.
  • Removal of the stock airbox frees up an enormous amount of space in the front of the filter than can be used for accessory storage like HID ballasts, ignition controllers and such that were previously difficult to package.
  • Serviceability of the throttle bodies becomes drastically less difficult to get to.
  • High quality lifetime Buna N 'X' rings seal off the throttle bodies in 4 places.
  • Adds a wicked sound that while docile at cruising speeds, barks with authority when cracked open.
  • All necessary hardware included.

Suggestions upon installation:

  • It is advised but not mandatory to remove the emissions hardware when installing a Rottweiler Intake System. The part where the Secondary Air Injection (SAS or SAI) attaches to the stock air-box is removed with this installaton and if the installer wants to keep the SAS/SAI on the bike (rare), you will need to attach a small filter to the leftover hose. See our SAS Stage kits for block off kits.

Downloadable Instructions

Product Videos

Warranty Information

This product carries a 1 year warranty against defects in materials and craftsmanship.

Product Reviews

Write Review

  1. Snarling beast unleashed!

    Posted by Tim on 20th Mar 2017

    New snarling intake sound is awesome, fantastic throttle response, easy filter change and bonus! now checking the valve clearances can be done without taking the tanks off- just pop the filter and base plate, pull carbs and the heads are right there.
    Boom!

  2. Straightforward Installation for Neophyte Mechanic

    Posted by Evan on 19th Jan 2017

    Haven't worked around engines since high school, 34 years ago. Anticipating this installation wasn't bad after reading instructions online and watching the youtube vid. Installation went smoothly. Instructions are for 990, and the 950 is a bit easier. Idle adjust knob not mentioned in step 21 or thereabouts, which you'll have cut a factory zip tie in order to push it up through the stock air box and re zip it where it was.

    Bike is running rough right now, so a quick call to Rottweiler had me talking with a technician who was there with a great attitude and suggestions for steps I can take to make it work as advertised. I'm hoping it was simple operator error on my part. Jetting may be necessary.

  3. WARNING - YOU WILL NEED TO GROW SOME NUTS

    Posted by Unknown on 30th Jul 2016

    Only takes about 6 beers to fit this quality product , impressive power gains from my big banger 950 now
    This Rottweiler needs a leash !!!

  4. Eccezionale!!! From italy 5 stars!!!

    Posted by Unknown on 20th Jul 2016

    Fantastic product and Quality materials thank you Rottweiler

  5. excellent

    Posted by Unknown on 5th Jun 2015

    Very noticable change in performance, and addictive sounds from the intake

  6. This will save you money in the long run

    Posted by BVM on 26th Apr 2015

    After spending hundreds of dollars on stock air filters for my 950 I kick my ass for not buying this sooner. The prefilter is a must for the type of riding I do and makes cleaning a snap. Performance gains are measured in sore cheeks you have after every ride. A must have, don't delay as you won't be disappointed with this first class performance part .

Quantity:
SKU:
RIS-950-ADV
Shipping Weight:
1.60 LBS
Availability:
Usually ships within 24 hours
Shipping:
Calculated at checkout