Not sure what kit is right for you? Click here for our guide chart.
The SAS Valve Removal Dongle will allow you to remove the SAS valve without the FI light coming on just by plugging in into the harness where the SAS valve plug goes. It fools the stock ECU into thinking it is still there. You will still get warning lights for other important items. Look into our SAS 'Stage Kits' for more comprehensive 'plug and play' kits. Fit's all KTM twin cylinder fuel injected bikes.
If KTM 690 (08-13) / Husky 701 (2017) is chosen below, note the picture that will appear. There is no actual plug available for the type of SAS valves used on these bikes so the method we use is to supply a pre crimped and heat shrunk resistor that can be inserted into the harness plug and 100mm of self sealing heat shrink is supplied to seal it from the elements.
In this video we walk you through every detail of the typical emissions system on a KTM big twin so that you can better understand how it all works and where parts of the system are typically found.
This product carries a 1 year warranty against defects in materials and craftsmanship.
Posted by Robert Finn on 6th Jun 2019
plug and play
Posted by Unknown on 21st Apr 2018
Super easy install and got rid of the engine check light on my Husky 701 after installing. Make sure to insert it all the way!
Posted by Unknown on 14th May 2017
Love the Rottweiler Performance videos that make installing their parts a breeze. Product works well and have zero issues. Look forward to my next purchase with Rottweiler Performance.
Posted by HH on 9th Jan 2017
Plug n' play. Got rid of my FI light immediately after install.
Posted by Ryan Gifford on 18th Jul 2016
Getting rid of needless valving and hoses, cleaning up the engine. This tool is the answer. No error code on the speedo. Excellent.