Not sure what kit is right for you? Click here for our guide chart.
NEW! All of our SAS plates are now Thermocoated! This means that unlike other anodized plates, they will never fade from heat or UV and will look good for the lifetime of your motorcycle.
Recommended for the Adventure 1190/1290, the SAS Stage 2 kit contains everything you will need to remove the SAS system and has extra FI light eliminator dongles for the canister valve and SAS valve.
If you have an Adventure 990 or are interested in synchronizing your throttle bodies easily in the future after the installation of an SAS kit, see our Stage 3 kit with long lasting Tygon hose and extra throttle body synchronizing lines. Note: Removal of the throttle bodies is necessary if installing Stage 3 on Adventure 1190 or 1290 bikes. It's a few electrical connections and two hose clamps if the Rottweiler intake is also being installed at the same time.
The SAS Stage 2 kit includes:
Kit Selection Chart:
Choose 'A' Kit for:
Choose 'B' Kit for:
(See SAS Stage 3 Kit for this extra hardware and the added ability to have quick access to balancing your throttle bodies if you regularly preform this task.)
A brief description of the SAS and canister systems on KTM Big Twins, what they do, and how and why to get rid of them by Rottweiler Performance. See us at: www.rottweilerperformance.com
This product carries a 1 year warranty against defects in materials and craftsmanship.
Showing reviews 1-40 of 96 | Next
Posted by Steve w on 30th Jul 2020
I followed the video instructions and the job was easy and the ktm toolkit has all the tools necessary. I rode a couple years with the bodis link pipe, Akra map and k&n filter. The bike crackled and popped. Not any more
Posted by Unknown on 19th Jul 2020
Have bought before and would again, complete kit less specific instructions .
Posted by Unknown on 11th May 2020
Every piece fits just as it should. I'm very pleased with the result. I took my time to do it, since it was my first, but no problems. At the end, no errors on the dashboard :)
Good product, recommended.
Posted by Andy on 21st Apr 2020
2017 1290 super adventure R, worked well for me. Really like the extra space, but worth noting install on SAR much harder than the super duke in video.
Posted by Kyle on 9th Apr 2020
The product works great. Removes a lot of junk from the bike and cleans it up, but the instructional video for the removal isn’t on a 2008 990 SD, so pieces are in different places than they are on the video. If you have a little bit of knowledge about your bike you should be fine.
Posted by Allan Shiell on 26th Mar 2020
I put off doing this SAS removal because I had previous experience removing the tank on my 1090 Super adventure which was a bit of a chore. The Superduke plastics are easier to remove and the tank whislt finnicky is pretty easy to remove and replace. Once the tank is off its really easy but I wish the Rottweiler folks would update their instruction video. Its not really different but enough so that you have think about some steps. Not difficult and the feeling of getting rid of a bunch of Eurojunk hoses, sensors and motors is so rewarding!
Posted by john macdonald on 24th Mar 2020
What can I say fit great looks the nut , so much better than the standard set up
The video on youtube is spot on what an easy fit
The only down side was the delivery and the duty to the uk , but that's not rottweiler performances fault
Posted by the canadian on 31st Jan 2020
If your on the fence, jump on in...it's easy, clean, and helps your bike drop it's testicles (if it has any) a bit more..thanks Rotty!
Posted by Santiago on 19th Dec 2019
I called to make sure (KIT A) works for my 2014 Super Duke R. I place an order online and received it fast! I followed the youtube instructions and had NO PROBLEMS with codes.
Posted by AM on 19th Dec 2019
I really wanted to reclaim the space under my seat where the stock canister sits for tool storage. This kit gave me everything I needed to remove the canister, the valves and most of the vacuum lines. Directions were clear and easy to follow. Good stuff!
Posted by email@example.com on 7th Oct 2019
Posted by Mohamed Soliman on 9th Sep 2019
Awesome kit easy to install everything was on the money with ease of install & function
Posted by Andrew Liebert on 8th Aug 2019
Excellent product. Very easy install
No codes. Bike runs Great with the SAS stage 2 delete and PCV, Arrow decat mid pipe. Akropovic silencer.
And Healtec Servo deleted.
Posted by Unknown on 12th Jul 2019
Very easy install. Block off plates are high quality. Opens up space under the rear seat and removes a bunch of clutter .kit is a great addition when installing the Rottweiler intake unit
Posted by Dom on 9th Jul 2019
After reading reviews and watching videos, I went for the Stage 2 SAS/Cannister Removal Kit for my 2018 1290 KTM SAS. Shipped to Australia (shipping was expensive, but this is not due to Rottweiler Performance, it's just expensive to ship from the US) and arrived quick enough. Fitting really was as easy as the videos showed and has cleaned up under the fuel tank and under the rear passenger seat.
Thanks Rotty Performance
Posted by vince eckerman prescott az on 22nd Apr 2019
kitis great not a bad install a must with a intake system if you want a bad boy 990 order your intake sas kits today do not wait any longer
Posted by mitchell green on 21st Apr 2019
great product everything you need to replace the sas unit on your and the block off plates look cool!!
Posted by Charlie on 14th Apr 2019
The removal of the charcoal canister and SAS was an easy removal. No warning lights. On a scale from 1 to 10 with 1 being the easiest, it was a 3. The only reason it was not rated easier was because of the alignment of KTM's alignment of the fuel tank housing and body panels. That is an issue with KTM not Rottweiler Performance. You can use plastic body tools to help with the reassembly. Two thumbs up. Now you can store the tool kit where it was designed to be stored.
Posted by brian on 8th Apr 2019
Easy to install, no check engine light
Posted by E on 11th Mar 2019
Went ahead and got Stage 2 Kit while I had the bike apart for a valve adjustment.
Eliminated a pile of black spaghetti and finally have a spot for storage under back seat.
Still testing reassembled bike out, but no warning lights and all works as it should.
Posted by Evan on 27th Dec 2018
Very pleased with the Stage 2 kit, easy enough to install with the YouTube video, amazing how much SAS junk on engine and canister now gone leaves plenty of room under seat for rain gear and tools. The block off plates are well made and coated, nice clean look on engine. Will keep buying from Rottweiler.
Posted by John Lipani on 21st Oct 2018
Easy installation. Their video made it so easy anyone can do this. No codes after install.
Posted by Antonio Trillo Prieto on 28th Sep 2018
Muy fácil de montar
Posted by Brian Bellamy on 30th Aug 2018
Perfect fit, easy installation, and great results. Lost a little weight and no more popping on decel on my 1290 superduke r.
Posted by Helenius(FIN) on 26th Jul 2018
Very easy to install, high quality and cleans up your engine bay. Absolutely 5 stars.
Posted by DB Wesner on 7th Jul 2018
The Stage 2 kit removes a bunch of mess from your LC8. Simplify your maintanence and Feild repair by getting rid of crap & weight that won’t serve you. Easy enough to install. Just do it, I waited longer than I should have.
Posted by Unknown on 6th Jul 2018
Straight forward easy mod. I reccomend.
Posted by Unknown on 25th Jun 2018
Decided to try this kit while performing my Air filter service. Easy to install after watching the video link provided. Tool kit now fits under the seat like it should!
Posted by Yacos on 24th Jun 2018
Install was very easy thanks to the video they have. I wish every manufacturer would do this
Posted by Steve Botkin on 18th Jun 2018
This is the third SAS/canister kit I've installed. One on my 06 950, my buddies 2010 990, and now my new 1090. It's very easy to do, everything fits perfectly and it gets rid of a lot of unneeded crap that really clutters up the bike. The best part is on the 1090, I can now store tools under the seat where they should be.
Posted by Unknown on 27th May 2018
Easy install, nice to have the space under my seat for much needed storage.
Posted by Unknown on 24th Apr 2018
Easy install on 1090R. Removed some weight as well as gave me some underseat storage for tool pouch/flat repair kit. With o2 sensor plugs, the bike shed 3lb 4oz.
I watched the install video and read the instructions and it was fairly straight forward and simple.
Posted by rastonr on 4th Mar 2018
Bike runs great - would definitely recommend.
Posted by Jason Robert Wengel on 4th Mar 2018
Simple, gets the job done. All components seem to be top quality and the instructional videos are helpful.
Posted by John Phillips on 28th Feb 2018
My bike is a 2016 special edition model KTM 1290 super Duke R.
I followed the install instructions on Utube & that went well.
When I got to the part related to charcoal canister & dongle install I found the canister is not there on this bike.
The connector under the right side cover has nothing installed.
I have removed the Cat and installed a Remus link pipe with the standard Akra slip on with dealer installed Akra map.
After that the backfire & flame from the pipe had to be seen to be believed.
Install of the SAS remove kit cured that. I installed the Rotweiller fueling dongles at the same time.
Bike is running really well with no fault codes and fueling feels spot on.
The bike was purchased from the dealer in Indonesia and was new when I bought it.
Can you advise on the charcoal canister not being installed and why there is no fault code with the connector being open.
As well there is a knurled plastic screw supplied in the SAS kit.
Please advise what that is for.
All in all a good thing with easy installation and a great result for how the engine runs.
Posted by Richard Mazur on 19th Feb 2018
Looks and works as it should! What else can I say?
Posted by Craig on 14th Jan 2018
Posted by Rab on 7th Jan 2018
Easy to fit well made kit, great people to deal with, no problems whatsoever
Posted by jiovani on 6th Jan 2018
Posted by Tom on 20th Dec 2017
I must say I'm very impressed with Rottweiler products. This is my first time purchasing with them and the service is second to none! The stuff comes well wrapped up and nothing was damaged during transit from the U.S.A to Ireland. The parts are top quality.
Next in line is the Rottweiler intake system for my 990. Thanks to all at Rottweiler and Happy Holidays!
Showing reviews 1-40 of 96 | Next