Fits all 2011-2018 KTM 690 Enduro/SMC-R & 2016+ Husqvarna 701 Enduro/Supermoto
Build your own Vanasche Motorsports brake pedal, right on this page. Either choose the lever alone in either black or blue and use your stock pad or add one of 6 available pad additions below in either black or blue.
The stock brake pedals on the 690 and 701 are simply put, spaghetti. One good dump to the right and kiss your rear brakes goodbye for the rest of the trip. The Vanasche Brake Levers are not only modular, but beautiful and tough, all in one. 'Future Proof' your ride with this fine addition.
Precision machined from Billet 6061 aluminum these pedal pads are very robust and with the anodized finish they look great too. The largest benefit coming from the pressed dowel pins which offer amazing grip as well as a true sense of feedback through pedal feel.
Lever options: (Silver / Black)
Pad Options: (Black / Blue / Orange)
- P1 - Similar in size and height to the stock lever. These fit my Billet Brake Pedal but also share the same mounting points as the stock lever for a quick and easy upgrade from the stock pedal pad.
- P2 - Underside mounted Pedal pad. This is a slightly oversized platform from stock and mounts on the bottom side of the lever. It provides about ~3/8" drop overall from stock. This is designed to work with my Billet Brake Pedal but with a small amount of filing it will work with the stock lever.
- P3 - Stepped pedal pad which offers two different braking heights for sitting and standing. Designed to work with my Billet Brake Pedal as well as the stock lever. The upper platform level is about the same height as stock, the lower platform is dropped by about 1/2".
- P4 - Oversized pad. Simply a larger surface area over the stock pedal pad. This pad has two mounting positions so that you can position it further forward or rearward.