Old methods of power distribution have gone the way of the floppy disk; it’s outdated technology. With the PDM60, there’s no more blown fuses, tangled wiring, overloaded circuits, CanBus related power interruptions, confusion or frustration. The PDM60 is fully user programmable via the PDM60 dashboard software (set circuit triggering/switching methods, delay circuit activation/deactivation, and individual circuit amperage levels)
Six power circuits, and 60 Amps of power handling capability; enough to handle all of your gadgets and accessories.
With the PDM60 installed, adding or removing aftermarket electrical devices\electronics is a breeze. It eliminates the need to check or replace fuses. It eliminates the need to install relays to power higher amperage applications like driving lights, heated clothing, Stebel horns, etc. It completely eliminates any potential for current draw related problems commonly associated with CanBus style electrical systems.…….
Plain and simple, with the PDM60, your vehicle will be better equipped, and better protected.
Easy – Easy to configure, easy to install, and easy to own.
Rock Solid – Tested for over 500,000 (yes….five hundred thousand) cycles, under a full 60 amp load, and still running strong!
Completely Sealed – Fully encapsulated in an industrial grade, hi-temp, potting material to make it fully water, weather, and dust proof from even the harshest of environments.
Clean – The compact size, combined with the easy one wire outputs, allows you to install and wire all your accessories without having the finished product looking like a birds nest. Simple and clean always makes your wiring projects better!!!
Customizable – The easy to use dashboard allows everyone to set up the PDM60 exactly how they want it for their accessories and their vehicle of choice. Down the road if things change, or you add more accessories, all you have to do is reprogram it to your liking and you are off and riding again.
CAN System Capable – If you have a CAN type electrical system on your vehicle of choice, no fear! The PDM60 is completely CAN compatible. You can wire the trigger wires right into the CAN system and it won’t even know that it is there.
Why Put a PDM 60 Power Distribution Module on a Motorcycle?
Warranty fulfilled by Rowe Electronics.
Posted by Unknown on 23rd Aug 2020
I’m running power commander, auto tune, trail tech voyager pro, grip warmers, phone charger- too many wires to the battery. Instead I have 1 heavier gauge power wire and ground wire to the battery and all sources branch off the pdm60, cleaner, safer and easier. Well worth it if your using more then 2 electrical sources.
Posted by Heykel H on 18th Mar 2018
This is a must-have if you plan on adding navigation, auxiliary lights, or any other accessory that requires power. Very easy to install.
Posted by Ivan on 19th Feb 2016
Plug it into your computer, set the desired output, update the unit, and your done.
Posted by firstname.lastname@example.org on 6th Oct 2015
When you start adding things like GPS or Auto Tune or cellphone chargers, with the PDM60 the sky is the limit. Doing it the old fashioned way with crimps and cuts and joins and soldering and piggy back crimps and so on you will have a wiring mess that looks like a tossed plate of pasta. Just buy this thing - it's awesome
Fuseless operation will reset with just a key off and on, set the amps per circuit via laptop, delay on and off, this thing does it all and is worth the extra $$ when compared to other inferior units.
Posted by Unknown on 29th Sep 2015
This is light years ahead of any old fashion fusebox. Super easy to install and program. Well worth the money.