Fitment:
Not sure what kit is right for you? Click here for our guide chart.
NEW! All of our SAS plates are now Thermocoated! This means that unlike other anodized plates, they will never fade from heat or UV and will look good for the lifetime of your motorcycle.
This bike specific kit contains everything you will need to remove the SAS and canister system and also includes both dongles to keep the FI light from coming on. All of the pieces you will need are contained in this very comprehensive kit.
In this video we walk you through every detail of the typical emissions system on a KTM big twin so that you can better understand how it all works and where parts of the system are typically found.
Showing reviews 1-40 of 82 | Next
Posted by Will on 10th Sep 2023
Everything you need and no need to remove airbox. Would be five stars if a plug was 3d printed for the resistor to avoid the shrink tubing.
Posted by ian on 14th Jun 2023
I just did the install and only did a brief ride but it was an easy install/removal with very in-depth instructions. The bike looks cleaner and the Vit is running even more smoothly now. That coupled with fuel dongle removal and something as simple as removing the airbox lid and my 701 feels even more powerful. The decel pop is still there though but it does seem a bit quieter. If it goes away completely, I’ll revisit and bump this up to five stars.
Posted by Chuck on 18th May 2023
Svartpilen now feels it has sport mode! Much better throttle response and better low rpm power. Easy install.
Posted by Ty on 12th Mar 2023
Very easy to follow instructions. Really cleans up the clutter and opens the bike up nicely!
Posted by Rocket Man on 20th Feb 2023
The bike looks better without the canister and tubing.
Posted by DG on 23rd Jan 2023
Really happy with this kit. Cleaned up a bunch of unnecessary hoses and things from the engine area. Highly recommend it.
Posted by John Ottaviano on 14th Dec 2022
Cleans it up nice playe fit good.
Posted by Matt on 16th Oct 2022
Shocking how much stuff you end up pulling off your bike when you do the SAS removal. Installed at the same time with a new Rade Garage intake + Storage. Highly recommend.
Posted by Carlos on 15th Sep 2022
Works nicely, not too hard to install. Bike runs better after fitting this kit. However Engine Light has appeared twice since I installed it and I had to go to the3 dealership to have it errased from dash.
Posted by Trevor Williams on 25th Aug 2022
Instructions were easy to follow said it would take an hr but only took about 20 mins. And the quality of parts are top notch. Looks good on bike too.
Posted by Volodymyr Shoniia on 8th Apr 2022
Great instructions, easy process.
Posted by Jeremy Dahm on 11th Mar 2022
First time attempting something like this. Download the instructions, don't just open. You can really zoom in. If I can do it, your cat could do it. Branded plate looks badass.
Posted by Jonnathan Villegas on 31st Jan 2022
Perfecto...
Posted by Robert Butler on 29th Jan 2022
Just got done, think I'll like it. Had the same kit on my 1090.
Posted by NORTY FLATZ on 15th Dec 2021
I installed this kit, using the instructions found on yootoob. I kept thinking that I missed something with the Rott site instructions, but I guess I didn't, as there's no "CEL."
Posted by Brian O Nieves on 26th Nov 2021
Excelente productos y rapido el envió
Posted by Gary Smith on 6th Nov 2021
Frustrated at duty and import costs to Canada - Rottweiller should sort a Canadian distributor - but SAS delete kit/ canister removal was easy to fit and appears to work well on my 701 Enduro.
Posted by Jeffrey Prince on 4th Nov 2021
Good quality product, easy to install. Highly recommended
Posted by Unknown on 21st Oct 2021
Quality piece of kit, comprehensive instructions, fast delivery.
Posted by Richard Karlsson on 7th Oct 2021
SUPER FAST delivery to Sweden
Posted by Mike Emery - Devon, UK. on 4th Sep 2021
I installed the power commander, SAS removal and air filter kit all in one go. It took me about 3 hours to do, consulting Rottweiler’s own help page which directed me to some great installation videos. The results were very good and very much worth doing. Thank you.
Posted by Schralper on 3rd Sep 2021
Easy install, took me about 1hr total to remove SAS/ canister & install Rottweiler parts. I also disconnected battery to reset ECU bubble memory.
Posted by kurt on 28th Aug 2021
Awesome set up I am so happy with Rottweiler! They are the best! My 701 has tons of power now! Sounds awesome! Lighter! I can feel the difference it handles and jumps better with the weight reduction from this setup. The engine lug seems to have disappeared when I’m off road now. Thank you Rottweiler I will be recommend you guys!
Posted by Adam Klinger on 5th Aug 2021
I was really impressed by the completeness and the documentation for this kit when I installed it on my 701 Svartpilen. Clean instructions, included zip ties and nice quality hardware. Recommended
Posted by dean kreismer on 30th Jul 2021
easy to follow directions,eliminated the decell pop!! cleaned up some space, i even made up a trick dongle bracket out of aluminum.
Posted by Unknown on 29th Jun 2021
Super simple instillation. Exactly as advertised. Great instructions and it REALLY helps clean the look of the bike. Performance is noticeable for sure!
Posted by Justin on 3rd Jun 2021
Fits nicely and functions as advertised, instructions are not in the box
Posted by Jonathan Gruber on 3rd Jun 2021
Great instructions and all high quality parts and instructions. Highly recommend.
Posted by Michael DORDAIN on 16th May 2021
very good product and clear instruction
Posted by Aaron Wilson on 31st Mar 2021
Did the trick clean and simple. Easy install. Very happy.
Posted by Unknown on 23rd Feb 2021
Completely changed the personality of the motorcycle.
Posted by John Works! on 30th Jan 2021
The great:
Removes backfires (I have The Rottweiler intake, crankcase breather, tuned Power Commander and Lio Vince exhaust on a 2018 Husqvarna 701). Kit is easy to install and comes with all the dongles you need, no FI light.
The less great:
No instructions in the box, had to find them here on the website. The heat shrink tubing was a little big, this could be application error but I definitely needed a lot of electrical tape to close up the ends. The plastic barb that you’re supposed to join two hoses together for your gas tank overflow is a joke. I ended up keeping the Y connector and plugging one side.
Overall I am extremely satisfied with my purchase and thank Rottweiler for this comprehensive kit and great instructions.
Posted by Doc Sarvis on 8th Jan 2021
Bought a bike in with half assed plumbing that needed to be fixed. This kit corrected it. My only slight gripe was no instructions enclosed. Otherwise its a lot of value for money.
Posted by Unknown on 27th Dec 2020
Yes it works with the LR . only difference youl find on instructions is canister is located in different spot and youll need to connect new breather hose to the Y where the 2 tanks breather hoses meet up. very simple to adapt .
Posted by Unknown on 25th Dec 2020
This paired with the Rottweiler Performance fuel dongle will make you feel a very good difference on the rideability of the bike (specially in the lower revs). I feel like the bike opens up better just with this canister removal kit but I don't know if it's just me. Both are great compliments to the bike before the other good stuff like power commander and intake system. It was installed on a 2020 Smc r with a Wings slip on exhaust.
Posted by Nick on 6th Dec 2020
love this kit i got it with the power commander for my 21 690 smcr i installed them all at once when i finished i had a check engine light on my bike, i wasnt sure if it was something from the power commander or from the sas removal kit, sure enough it was the blue connector that you have to plug the resistor in and heat shrink it apparently the resistor or whatever it is, is polarity sensitive i unplugged it and flipped it around then plugged it back in and no check engine light at all, the directions didnt mention this at all so i dont know if it just my bike being a 21 maybe something is different or maybe it was just not making good contact but i definitely had both prongs plugged all the way in the first time
once i got that fixed i had no more issues at all rotweiler is awesome the map they loaded to my power commander is absoloutly perfect and i custom fitted a fmf 4.1 too so not sure what map they used but its great
Posted by Sam C on 1st Nov 2020
Crazy fast shipping. Very detailed instructions. Easy install. No "engine errors" or anything untoward. Certainly not an essential mod, but only took me half an hour and saved me 600 grams.
Posted by Josef Peterer on 21st Oct 2020
Quick easy install !
Posted by Unknown on 26th Sep 2020
Went on without a hitch, high quality, just like everything else they make!
Posted by Unknown on 23rd Aug 2020
Excellent quality, excellent fit and finish, even includes computer dongles for no check engine lights. With the intake kit a must have.
Showing reviews 1-40 of 82 | Next