X-Trig - Pre-Load Adjuster - KTM/HQV/GG 690-701 Enduro & Supermoto

Beautifully made part with precision adjustments. The biggest challenge is the need to practically disaasemble the whole rear end of the bike to get the shock out. Even with all the preload removed from the stock spring I still had to use a spring compressor to get the shock apart, remove the stock adjustment collar and install the XTrig adjuster and locating collar and pin. When installing the shock, make sure you have angled the adjusting screw on the shock so the Xtrig fits inbetween the frame rails of the 701 and you have access to the adjuster.